#include "board.h"
#include "hal.h"

#define PBIT(PORT, LINE) ((PAL_PORT(LINE) == PORT) ? (1 << PAL_PAD(LINE)) : 0)
#define PAFIO_L(PORT, LINE, AF) (((PAL_PORT(LINE) == PORT) && (PAL_PAD(LINE) < 8)) ? (AF << (PAL_PAD(LINE) << 2)) : 0)
#define PAFIO_H(PORT, LINE, AF) (((PAL_PORT(LINE) == PORT) && (PAL_PAD(LINE) >= 8)) ? (AF << ((PAL_PAD(LINE) - 8) << 2)) : 0)
#define PAFIO(PORT, N, LINE, AF) ((N) ? PAFIO_H(PORT, LINE, AF) : PAFIO_L(PORT, LINE, AF))

#define OPEN_DRAIN(PORT) (\
0)

#define OUT_BITS(PORT) (\
0)

#define IN_BITS(PORT) (\
0)

// Alternate Functions
#define AF_BITS(PORT, N) (\
0)



/**
 * @brief   PAL setup.
 * @details Digital I/O ports static configuration as defined in @p board.h.
 *          This variable is used by the HAL when initializing the PAL driver.
 */
const PALConfig pal_default_config = {
    // GPIO A
    .setup[0] = {
        .DIR = OUT_BITS(IOPORTA),
        .INE = IN_BITS(IOPORTA),
        .PU = IN_BITS(IOPORTA),
        .PD = 0x0000,
        .OD = OPEN_DRAIN(IOPORTA),
        .DRV = 0x0000,
        .LOCK = 0x0000,
        .OUT = 0x0000,
        .CFG[0] = AF_BITS(IOPORTA, 0),
        .CFG[1] = AF_BITS(IOPORTA, 1),
    },
    // GPIO B
    .setup[1] = {
        .DIR = OUT_BITS(IOPORTB),
        .INE = IN_BITS(IOPORTB),
        .PU = IN_BITS(IOPORTB),
        .PD = 0x0000,
        .OD = OPEN_DRAIN(IOPORTB),
        .DRV = 0x0000,
        .LOCK = 0x0000,
        .OUT = 0x0000,
        .CFG[0] = AF_BITS(IOPORTB, 0),
        .CFG[1] = AF_BITS(IOPORTB, 1),
    },
    // GPIO C
    .setup[2] = {
        .DIR = OUT_BITS(IOPORTC),
        .INE = IN_BITS(IOPORTC),
        .PU = IN_BITS(IOPORTC),
        .PD = 0x0000,
        .OD = OPEN_DRAIN(IOPORTC),
        .DRV = 0x0000,
        .LOCK = 0x0000,
        .OUT = 0x0000,
        .CFG[0] = AF_BITS(IOPORTC, 0),
        .CFG[1] = AF_BITS(IOPORTC, 1),
    },
    // GPIO D
    .setup[3] = {
        .DIR = OUT_BITS(IOPORTD),
        .INE = IN_BITS(IOPORTD),
        .PU = IN_BITS(IOPORTD),
        .PD = 0x0000,
        .OD = OPEN_DRAIN(IOPORTD),
        .DRV = 0x0000,
        .LOCK = 0x0000,
        .OUT = 0x0000,
        .CFG[0] = AF_BITS(IOPORTD, 0),
        .CFG[1] = AF_BITS(IOPORTD, 1),
    },
    .ESSR[0] = 0x00000000,
    .ESSR[1] = 0x00000000,
};


void boardInit(void) {
}